Serrurier MOMO

LOCKSMITH DODGE

CONTACT US

LOCKSMITH KEYS AND IGNITION DODGE.

Ignition problems with Dodge-branded cars have always been recurring. The key is still stuck in the barrel and can no longer be removed or turned in the ignition. Many mechanics in Montreal are struggling to locate the source of these difficulties. They sometimes claim that the problem is at the key level when it comes from inside the barrel. Discover in detail with Serrurier Momo the best solutions to solve this problem.

Where does the ignition problem with Dodge cars actually come from?

The difficulties of lighting up your Dodge car are not always located where your mechanic believes it is. In fact, this is a safety defect that is normally included in the warranty offered by the manufacturer. After the warranty expires, the problem resurfaces. This is your Dodge car that does not start! It is therefore necessary to immediately find an expert who can solve the problem.

But what should you do if you are not close to our garage? We offer you a temporary solution. This involves lubricating or fattening the car key with PL-100 lubricant. This technique will be able to start the vehicle. After which you must contact us. Our team is all over the city to serve you.

What can I do to fix a Dodge ignition problem in Montreal?

Generally, the first reflection when you have a Dodge ignition problem in Montreal would be to find an expert. Fortunately, we are the answer. Thanks to our experience gained in the field during our thousands of repairs of this kind, we can satisfy you the fastest. In this regard, we have the necessary equipment that can really help you.

Disadvantages of the Dodge chip wrench

The peculiarity of chip keys is the fact that they are contact keys with integrated circuits to the chip. The circuit is powered by a signal transmitted by the vehicle’s computer. So it doesn’t need any battery to work. When the transponder key is inserted into the ignition, the vehicle computer sends a signal to the circuit.

If the circuit does not respond, the vehicle will not start. Most automakers had been using chip technology for years. Today, the advantage of owning your Dodge with a transponder wrench is that it makes car theft very difficult.

Unpleasantly, it is found that this new technology is the source of problems related to starting Dodge cars. Either it is a broken, worn mesh spring, or it is of poor quality in the barrel and wear. These are the most common problems.

The great repair task that the automotive locksmith will have to do will be to disassemble the components of the ignition. Performed on the starter, the specificity of this work can take between 2 to 3 hours.

LOCKSMITH 24/7

JOIN MOMO, LOCKSMITH IN MONTREAL
Tel: 514 999 4341

Ignition problems faced by Dodge cars in Montreal



The Dodge ignition difficulties encountered are diverse:

– The key does not fit correctly into the ignition;
– The key is stuck in the lock and the steering wheel remains locked;
– The key fits into the barrel, but does not turn.

In these specific cases, it is important to call on specialists in the field to solve the problem. He must also have good experience in this area in order to intervene effectively without wasting time. Expert in car lock troubleshooting, Serrurier Momo is willing to come to you if you are in Latin Quarter, Little Italy or Bois-Franc. What’s better, our intervention is 24/7.

Temporary solution

Here are some temporary solutions to try to move your vehicle to a safe place if it no longer starts normally.

Keep in mind that these solutions are random and not guaranteed, they eventually allow a “last start” and will not avoid the intervention of the car locksmith, because this problem does not depend on the key, but on the barrel, and will recur.

Changing the barrel at the dealership costs more than $750. Momo should not exceed one third of this sum for a guaranteed repair.

TEMPORARY STARTUP SOLUTIONS

  • Vibrate the key up and down so that it eventually turns in the barrel.
  • Push on the key gently to bring it into contact
  • Spray a lubricating product (WD-40) into the ignition to facilitate key entry

Imagine…
It’s winter, it’s minus -20°C. everything freezes, including door locks!
You are in a hurry, the door must open! Alas, the lock is so frozen that the key breaks in the barrel. You look bewildered at the piece of key left between your fingers, and see the other end of the key… always in the lock. What can I do?

BRANDS

CONTACT US

Do you have questions about our services or need a locksmith? I would be happy to answer your questions and be able to direct you to the best possible option, according to your needs and budget. Do not hesitate to contact us at any time! Simply fill out the form below.


    0.00 avg. rating (0% score) - 0 votes