Each time the ignition key is turned, the starter is asked to start the vehicle. Therefore, if it does not turn, it will be impossible to roll the automobile. Several reasons may be at the origin of this mechanical malfunction. This is the case of the starter. You have the opportunity to know the failures related to it and that cause the start-up difficulties. We list some of them opposite and bring you some troubleshooting solutions.
Common signs of a faulty starter
Normally, when the ignition key is turned, the engine must react and start instantaneously. If it happens that it is not the case, then it may be that the problem is with the battery of the car. In this case, it is first checked whether the vehicle’s electrical equipment is working properly. We must therefore observe the headlights and the radio of the car and see if they come on. If not, then it’s probably a battery problem. In such situations, consideration should be given to charging or replacing it. In case the electrical equipment does not encounter any operating problems, it is therefore possible that the starter has failed.
In this circumstance, several signs may reveal a malfunction of the device. It may be that the car does not react and we hear a snap at the command. It is also possible for the starter to run in a vacuum emitting a loud noise without causing a reaction. Another sign that may indicate the failure of the starter is the car starting well, but an abnormal sound is heard at the engine block.
The causes of a starter that does not turn
When you turn the car key and nothing happens, it may be the battery lugs that have loosened or oxidized. If this is the case, it is advisable to disconnect the battery and clean the lugs using a wire brush. In addition, the problem may also come from the solenoid which is possibly defective. In this circumstance, the wiring between the Neiman and the battery does not pass. This type of problem can be detected by a voltage measurement at the various control circuit points of the device.
In the event that the voltage on the lug that supplies the Neiman is below 12 volts, a change of the starter switch is considered. A fairly rare cause that can also be observed is the car key that is no longer recognized. In this case, it is often necessary to try to start the car with the emergency key. It can also happen that the teeth of the launcher are broken or worn. The sprocket of the launcher can also slip and the coals of the starter can deteriorate.
Contact an auto locksmith when the starter is not running
When your starter is not running and you do not know how to do it, it is best to contact a car locksmith like SERRURIER MOMO. Available 7 days a week and 24 hours a day, we offer our services throughout the Montreal sector. So you can call your emergency locksmith at any time. Your car key will no longer start your vehicle, we will be there to help you urgently if necessary. For any car locksmith problem, we are the specialists to contact. Whether a car’s starter is broken or defective, we have an eye for quickly detecting the source of the problem.
Some details are visible to the naked eye, but others are less so. If the defect is for example in the sprocket of the starter or launcher, only a mechanical expert can detect it. All the more reason to request our services and thus benefit from the know-how of a professional. Our expertise allows us to intervene on several brands of cars. So there is no need to worry about being in possession of a Honda, a Chevrolet or a Hyundai. We master the properties of all its car brands. Finally, a starter may not run for a multitude of reasons. You can try to find the origin of the problem yourself or call SERRURIER MOMO. In addition to offering you impeccable services in terms of car locksmithing, we are also repairers who can change your starter or restore it to good condition. Do not hesitate to use our services thanks to which we will solve all your car problems.
